-
My latest addition.
Hi all thought I would share a few photos of my new winch.
https://plus.google.com/u/0/photos/1...85154234454596
https://lh3.googleusercontent.com/-9...255B1%255D.JPG
Had to take the bull bar off to get it in plus one pair of bolts where not long enough but all done now, just ran the winch out and in this morning.
-
sits in there ok, now to use it.
I used some 25mm convoluted tubing to protect that last bit of Dyneema/plasma hanging out the front.
I found those sleeves were not big enough when braided to eyelet for hook
-
Thanks for the tip will have to get some.