EGR Block & Provent finally done.

I finally managed to find the time to fit the EGR Block and pro vent can to the Patrol.

I wont lie, getting the Provent too clear the ABS, heater hoses, A/C hoses and all the other bits was a bit of a pain but im happy with how it came up.

EGR Block was a bit fiddley but only took 30 min or so. I dont think it has any more power but it def is alot smoother when it comes on boost.

No check engine light or limp home so fingesrs crossed so now to try and find the time for the aux fuel filter.

Cheers

Tim

Nice work..

You should be happy with that

I have to agree, great job.

One Question is that hose ok for oils, other than that gotta be happy

Its food/petrol rated, ive used it as breather hose (fuel & oil) on my race car for years, it turns a bit yellow after a while but its otherwise its fine. I couldnt find any oil resistaint black hose in Darwin and ive seen people use heater hose and that can go all soft and mushy with oil.

Check engine light came on this morning :(

Quote:

---

Originally Posted by NT09ST

Check engine light came on this morning :(

---

Do you have a Scan Gauge or similar to reset it?
I have not done the EGR block on mine yet as still deciding if I will drill a hole in middle of block to prevent fault light or buy a Scan Gauge.

I dont, ill just take it out on the wk end and put a 6mm hole in it to start with.

Nicely done