Printable View
Hi folks.
Was hoping someone could quickly explain to me the removal and cleaning process for the intercooler. Ive so far removed the lid. I can see only 4 mounting brackets, 1 electrical connection and 2 hoses. Is it simply removing the hose clamps on both inlet and outlet hoses and then the mounts??
Any pics would be much apreciated or links to other sites. If its as simple as that then just confirmation would be granted.
Cheers
Yeah its as simple as that. Just make sure you mark everything before removing so it can go back the way you removed it. As for the cleaning there is a couple of threads around here explaining some options.
Simple as . why dont you go the next step and remove throttle body and clean it aswell ,then you will see start of intake manifold .Its only a few more bolts .
i agree with boots. I would do the intake as well. you will see it when you take the hoses off. Mine was black when i first did it.
Here are some pics of it apart. Hope they help.
Attachment 20046
Attachment 20047
Attachment 20048
Attachment 20049
Attachment 20050
Attachment 20051
PS.. do your MAF sensor and disconnect the battery for 30 Minutes while you do this. Make sure you use a MAF Sensor Safe cleaner. It is important to at least disconnect this battery to let the computer reset as after the cooler is cleaned the air flow will be significantly different and it will need to relearn its inputs.
Attachment 20052
Attachment 20053
Attachment 20054
Attachment 20055