OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Search: Search took 1.00 seconds.

  1. Thread: Wheel bearings?

    by NP99
    Replies
    8
    Views
    2,563

    Better to do it all at once as you are....

    Better to do it all at once as you are....
  2. Thread: Wheel bearings?

    by Lieney
    Replies
    8
    Views
    2,563

    Mate, that is a wiper seal and not bearings. You...

    Mate, that is a wiper seal and not bearings.
    You should have seals that enclose the wheel bearings that are rubber lipped seals.
    I can't remember if the axle has an inner seal, but the oil / grease...
  3. Replies
    8
    Views
    2,563

    If your only doing the one side you can get away...

    If your only doing the one side you can get away with not removing the oil. Just jack the one side up so the oil won't come out.
  4. Thread: Wheel bearings?

    by NP99
    Replies
    8
    Views
    2,563

    I think you would hear and feel a collapsed...

    I think you would hear and feel a collapsed bearing, my guess is a stuffed seal, mine looks the same. Only one way to be sure..........pull it down and check.
  5. Replies
    5
    Views
    2,152

    yep as 04OFF stated mate, try and swap the wires....

    yep as 04OFF stated mate, try and swap the wires. Generally when you loose a direction on your winch it is a bad solenoid. The box on top has 4, if 1 is faulty then you will loose a direction.

    If...
  6. Thread: Winch Troubles

    by 04OFF
    Replies
    5
    Views
    2,152

    if you put the clutch lever to "free wheel" ,can...

    if you put the clutch lever to "free wheel" ,can you turn the drum in the "in" direction by hand ?

    see if the motor will turn both ways (under power) with the clutch set to free wheel.

    you...
  7. Replies
    21
    Views
    18,151

    Not really i have quotes here at trade price from...

    Not really i have quotes here at trade price from 500 through to 2200 so that sounds alright do the ring around see who does what mods to the turbo and make your decisions from there :). The 500 is...
  8. Replies
    21
    Views
    18,151

    Really depends on what they are doing for that...

    Really depends on what they are doing for that price i would be looking for a more suitable turbo.
    some of them will change a wheel and housing with another off the shelf unit and call it a high...
  9. Thread: New to 4x4

    by NissanGQ4.2
    Replies
    14
    Views
    3,273

    Welcome again Chris, Thanks for that, Great...

    Welcome again Chris,

    Thanks for that,

    Great bunch of members on here always willing 2 helpout where they can.

    Enjoy the forum and what it has 2 offer.

    Cheers
  10. Thread: New to 4x4

    by DX grunt
    Replies
    14
    Views
    3,273

    G'day Chris Welcome to the forum and glad you...

    G'day Chris

    Welcome to the forum and glad you could join us.

    Is your truck a ute or a wagon?

    You can post some pics in the Member's Ride section. Many of us use photobucket - 640 x 480.
    ...
Results 1 to 10 of 10