Some people fit rb25's rb26's the gearbox is different on the 2.8 you should be able to find a good second hand crank pulleys etc cheap enough i sold one for $100
plenty of 2.8's about with cracked...
Some people fit rb25's rb26's the gearbox is different on the 2.8 you should be able to find a good second hand crank pulleys etc cheap enough i sold one for $100
plenty of 2.8's about with cracked...
Hey all,
Just wondering if anyone with a 2.8 GU has fitted a provent catchcan, with my dual batts I am finding it very difficult to find a place to mount that will not require excessive lenghts of...
Your mate is right!
Problem solved, wrong model number supplied, although right part number, on the upside cleaned old MAF sensor and refitted now have bugger all smoke. All good
Boost sensor on inlet side of intercooler, PYRO about 50mm from turbo on dump pipe.
Cheers, the ferret.
Yep, just remove battery for access, on the side of the pump there is an oval shaped plate with two m6 studs, remove that and replace it with the modified one.
I comes with new 0 ring....
Up until a couple of weeks ago I had an MQ with a SD33T I know where the fuel pump is on that right in front and below the injector pump. I am new to the RD2.8T, the fuel line goes straight into the...
have a look here i had starting problems and did the fix mentioned above posted up pics and a general guide of how to fit...
After R&R my leaking timing cover and looking at the bypass fitting that is screwed into it and thinking may need to replace it, I remembered this and thought I should share this with you all.
...
The manuals on here are provided by the members and are free to download. All files that are hosted on this website are 100% VIRUS FREE. Links to files hosted on other sites you download at your own...
Ok jus got around to doing the hot start fix found it was really easy took around 20min to do and that was with taking pics so should take around 10min have uploaded some pics of the job this is how...
Thanks to Simshazz we now have the 2.8 TD supplement and can be downloaded in the below attachment.
Welcome to the NissanPatrol.com.au forum
Please spend some time to go visit the NissanPatrol.com.au Members Map thread and tell me your location so i can add you to the map :)
...
I doubt it if a dealer would do this mod but a good off road workshop Should be able to.
Yes its a commonly done mod, in fact there is a spread on it here in the DIY section under: Nissan Patrol...
For those members needing the original full factory 1998 Nissan Patrol GU Manual.
This manual covers RD28ETi.
Free download on below attachment.
Enjoy!
If anyone else needs other...