Mixture screw 2 turns out.
dont over tighten mix screw first, can damage tip and will never tune well afterwards.
Set idle at 650 + - 50.
Adjust timing for lpg I assume, say 15 deg.
choke, you'll...
Mixture screw 2 turns out.
dont over tighten mix screw first, can damage tip and will never tune well afterwards.
Set idle at 650 + - 50.
Adjust timing for lpg I assume, say 15 deg.
choke, you'll...
Here is a few pics of the rear drawer system that I have built up over the last few years. The whole system is built using 12mm ply and glued and screwed together with some 42 x 19mm pine bracing in...
Shouldnt be to much of a drama just means your wheels will stick further out on side of the car than the other if you wanna bring em back in line then fit the adjustables otherwise just make sure...
I dont run adjustable panards on my GUIV with a 3 inch lift. did not need them. sits perfect so no point. Saying that though, i have a pair of 3rds Production adjustables to go on it but never...
Heya guys and girls,
hope everyone has had an awesome weekend.....mine was great.. here is a little write up and a few pics about my weekend......
Well as i have started a new job in Perth last...
Hi Tony,
I have hide the plate numbers in the pics you posted in.
i didn`t manage to find your e-mail to send you the pics. In the private messages i also can`t attach files.. So i attach the pics...