Search:

Great day today NP family, we are back for good!

Long story short it has been quite a stressful 24 hours for myself lol

Someone complained about us (I can't go into too much details here) and...

Of course you can. Not sure why priming is a hassle though. Not like its hard to do. Takes a whole 20-30 pumps and its done.

OK now for the wheel bearings.

So you had to strip out the inner race from inside the Disk. Yes its a bugger of a job and a Brass Drift is your friend. I have used the old race to make a new...

You can get the required parts from "nizbits" a vendor on this forum.
Cheers, the ferret.

Oh thank god I thought I was the only one on the forum, I'm in for sure. Pm me to send me all the details ;)

Hey Benno, do you need to replace the whole assembly or just the mast?
If its just a mast you should be able to just remove the chrome nut at the base of the aerial mast and use the motor to drive...

More pics, I will have to work out how to align the pics with the text!

I have seen some junk used on safety chains, including alloy Karabiners from the $2 shop.

This move also puts a question mark over the use of a padlock alone, instead of a shackle

Thanks for...

SA Police have now confirmed that it is a legal
requirement nationwide and it’s the driver’s
responsibility to ensure compliance

Australian Design Rules and the Vehicle Standards Bulletin
...

Hey all

I have noticed lately there have been a few posts about smoke from diesels etc the colours and all that and what it means so i thought i would post up this link to help all those looking...

just did mine today same problem as yours , i had new bearings done and all the seals too also new tyres and a balance in the last week and the local mechanic wanted to pull it apart and do some...

I get a nice little shimmer at 85... tried wheel balance, rotation.... nothing will fix it... except ... I jutst drive at 80 or 90... no problem...

Mick

first check panhard rod bushes ... get someone to push the car sideways while you watch for any movement.
second is wheel bearings ... jack a wheel up and grab it top and bottom then check for any...

Ok i see so many posts about steering shakes and wobbles i thought i would try and keep it in one so that it isn't all over the place.
Feel free to add anything i have missed.
Ok things that worked...

As above, but if all seems to be in order. The one thing alot of people don't do on patrols is give them a sideways shake. Get your mate to grab the bullbar and push it sideways then pull back, get a...