Search:

I have just built some bolt-on sliders for my GU wagon.

My sliders sit just off the bodywork and are similar in height to the chassis rails. This allows a little flex and protection.
They are...

Hay bud. Just did the plugs in my rd28, got them off ebay, cost me 120 bucks. They I rang company before ordering to make sure it was two sets of three. Work perfect, fixed start up issue straight...

Heres something worth reading maybe? http://www.nissanpatrol.com.au/forums/showthread.php?9773-Build-of-Australia-s-FASTEST-PATROL-...Potentially-Using-RB26DETT-Goodness-%29

have a look at skytrols thread in members rides. his done one. as for being reliable. leave it stock

Dimmer or a PIR or auto on/off were $10 each. I have remote controll dimmer for the general camp lighting about $10 to I think. Wish I knew how to put pics on. My camp light was featrured in 4x4 aust...

No Probs, the sellers name is "niceforu365" light throws out 600 lumens and price is around $20, The off cuts could be used for the cargo area or to light up area when you open the door like on...

Hey mate I have had a good look for you and it looks like its your governor shaft which is sealed with an o-ring this has to be installed in a certain spot you may find when you pull your pump off...

I just piCked one up from hall towbars in SA, only $514. Dunno what they charge for fitting, I am fitting it myself, it's not to hard. Am taking some photos and plan on putting up a guide.

I made some holders for our drink bottles that don't fit in the console holders.
Got sick of trying to stop them falling over in the door pockets, so the wheels
started turning and this is what I...

http://www.nissanpatrol.com.au/forums/images/imported/2012/05/1.gif

Hi All,



Well I have finally finished the new Click A Part section. This has taken more time then anything I have done...

Hi Ripper,
There are so many things that cause vibrations, you usally have to do it by process of eliminationif there is nothing glaringly obvious.

Some things I have found to check...

When i did mine i pulled them out seperate due to the weight on the engine hoist i was afraid it might topple over.
I left the ac condensor in and the compressor only to find out i had to swap the...

If you have a Low Mount winch then 28 to 30m of 9 or 10mm synthetic rope will be a winner mate, the stuff on ebay will be fine. Beware that Synthetic winch rope is not UV stable and will be affected...

I run my pair of 240's with clear spot covers on them and the smaller 170's with crystal blue spread covers angled out towards the side they give me a good spread of light and the crystal blue covers...

The rear won't as the leafys have the larger h260 diff I think it is as for front they should change over. Check the compliance plate as to what ratios are in the ute.