12v will activate a 24v solenoid with no load on it. Different story if it has load on it though.
12v will activate a 24v solenoid with no load on it. Different story if it has load on it though.
Well for some time now we've been wanting a draw system for the back of the Q. Buying a pre made one was out of the question, especially as the father in-law is a carpenter... :049:
So after a bit...
According to the manual only European models apparantly have that feature.
I just bought and fitted one of these following NissPats lead.
I was looking for a multimedia unit that had a GPS and could run OziCE, be able to play CD/DVDS, be able to run a flash drive (for...
any questions or suggestions welcome.
It was built basically in 6 steps:
1: sub frame/shell made/fitted
2: top panels fitted
3: draws made
4: draws fitted with runners
5: draw fronts made,...
DRIVE LINE;
DIFFERENTIALS; First thing to check is oil leaks (note: oil leaks may also be caused by blocked breathers, see third paragraph). Oil leaking from the front of the diff where the tail...
There is a lot of information to put in here so this post/thread will keep growing over time, I'll add photos as I can.
This is by no means a complete or definitive guide, my aim is to give people...