Search:

Sorry thought the car in picture had leather seats, my bad.
Covers look good.

Hi threedogs - I run two Patrols - one LWB & one SWB both ZD30 engines - have had many interesting challenges with both - mostly to do with performance - LWB 2001, SWB 2003 - there are subtle...

Stokezi,

If you are replacing an old MAF with a new genuine one, i would say go for it.

If you are trying to find a cheaper replacement, I would be hesitant to advise you that it was a good...

Over fueling or loose hose may cause black smoke plus high EGTs

@Patroljock52 More details please sounds interesting

im not sure of that sounds like it maybe causeing it to over fuel or could be a number of things
causeing it

If you want your truck to last i suggest that you use oe parts
not saying the maf your asking about isnt any good but its best
to stick with the original as its pre set for the z3o

Re read the whole article no reference whats so ever, Sorry bout that

I can't find any torque settings in Ellery manual

They have them on eBay. About $175.

I prefer Autometer i have them on my rx7 in 2 5/8", but anything mechanical is good unless you spend a bit of coin and get liquid filled gauges which are more precise. VDO are good and don't break...

What gauges are you after mate?? I can get VDO and Autometer.

Cheers TD i just knocked off TBH lol

I seached for VDO gauges locally however they were still too exspensive, went for digital autometers from the US, $360 for pyro and boost express delievery.

Alitist007 might have a good idea on that one, must be working ATM

Yeah something like that. I actually took my IC into CR to get the sizing right. For under $10 I had new mounts.

May be even able to use some soft poly block from CBC bearings and just drill hole in centre.