Search:

I reckon so, but you may want to consider an additional bracket to support the extra weight. I was really hanging off the screws and as you can see, they're so tight that the bottom of the hose clamp...

Here's the solution a mate at work came up with - stainless steel cable clamps! :D Worked a treat and was able to have the awning sitting just over the doors, which also provides some weather...

I have not been out there myself since the signs, but do believe from other readings from various sources all is normal with access

We did a 2" lift, meaning 2 degree castor change. The correction bushes are 2 degrees, so castor should be back to stock.
Alignment on front axle was:
Camber +0.03 and +0.26
Individual Toe +4.3mm...

Bob Jane will know the factory settings. Don't bother until after the lift and make a decision then.

285/70R17
No lift just removed front mud flap on 2006 model
Bob Jane ( not sure where)
$390 a corner

Stretch isn't computer/phone savvy, and might be a while before he answers, so I'll do it...

Just purchased my new tyres being the Dick Cepek FC-II from the local Bob jane.
First impression are really good.
Very impressed.
Quiet and smooth.
Mind you I am coming off Cooper STT after 4...

Factory diff lock solenoid connector.