Search:

I guess you could ring Patrol a Part and ask - they are pretty friendly!

I can't help with parts, however the patrols were fitted with aftermarket a/c units once they hit aussie, so I doubt the brackets would be universal diesel to petrol. I think a wrecker might be your...

Hello Jase and welcome to the forum, some pics of the beasst would be great
Ask anything you want but most of all enjoy, Maybe start a build thread for yourself
in members rides

Hello and welcome to the forum.

Hello and welcome to the forum, might want to pop over to the introductions first before asking
questions polite and all, no harm done, Im sure some one will have an answer to any question
you may...

Clutch bleed line removed a few nights ago.
Spun up a brass plug to fit inside the original flange nut of the bleeder line.
Filled it with fluid and bled it clean in 3x pumps.

Now for the wiring...

Here is the engine with all the junk removed

68741
Removal of the Cold start valve is easy - a couple of bolts and blank off the pipes into the manifold with some 1/2" rubber blanking caps.
...

There is hardly any info on the TB42e - especially the fuel/inlet system. Thought I'd share what took a long time to find out.
Had to repair a water leak at the back of the block (heater hose...

Hey guys,

Just a quickie, tackling my efi switchover and came up against a chopped loom from when my Mav was gas/petrol. The loom had been chopped to hook up the LRA tank.

Now that I'm going...