Search:

Brake Proportioning valve. As load is added to the rear of the car it increases the flow to the rear brakes making them work better with the extra load.

The Red wire is the hi/lo cutout sense voltage input to the VSR. As you say it is connected to one terminal already and that is the terminal for the Cranker or Main Battery +ve.

So just to be sure...

Cranker +ve goes to the "Main"
Aux +ve to "Aux"
Blk ring terminal goes to earth
Blue is for override or emerg start or whatever. It needs a +ve input from the Aux Battery +ve to hold in the VSR....

Try this Bob. http://www.redarc.com.au/handy-hints/-/basic_sbi_install
Cheers.

Bob,

Found your problem, it should be:

PuL= Minus(-)05.4
PuH = 048.9

Mine is set at PuL = Minus(-)05.6
PuH= 48.7

Bob I think I still have instructions for the the Auber gauge set up. Got it off a guy on the patrol forum ( fox shooter ) who brought these gauges in 4 or so years ago.
If I still have it I'll...

Bob,

I recently installed both these gauges, when the boost gauge comes from Auber it will be set for BAR, you will need to change it to PSI,

In the instruction manual you need to make sure the...

There painted in 2 pack baked enamel. As for brand all car manufacturers just use what they can get cheapest at the time.

Cheers Mick.

Hi Bob, not sure on that one mate, but I would say the hose going to the injector pump if you can't fit it between the turbo and throttle body.
After all it is to monitor the boost pressure going...

B = Black
BR = Brown
W = White
OR = Orange
R = Red
P = Pink
G = Green
PU = Purple
L = Blue
GY = Grey

Na wrong snorkel n don't just use the 4.2 precleaner as your main air filter not good for 2.8
keep it in the shed as later you may want to upgrade to 4.2 td as most people do...

Hey bob if its a GQ it is like a syfon feed system the only pump is the primer pump on the fuel filter housing.
The later GU electric injection model sory I'm not sure if they have a pump in the...

http://www.nissanpatrol.com.au/forums/images/imported/2012/03/26.jpg
This is the standard air box with the snorkel attached But they are so restrictive and so is the pipe from the airbox to the...

I have seen people use a pre cleaner from the 4.2's on the rd28 as an air cleaner connected to the snorkel.
This is an alternative the gu zd30 airbox if you look i have a pic of it in this post....

Hi Bob,
I have a '97 RD2.8T with safari snorkel and it goes directly into the main air filter. I also have a '96 RD28.T on original filter setup and still has no precleaner. (Can't see one in the...