Search:

Is that a sway bar disconnect??


Tappin N Crappin

The link pins connect the sway bars at either end to the chassis ... good job to break one!!! lol well done!!

If that's the part, they are cheap as chips to grab from wreckers IF you can find...

Hi mate, just edited your original post 2 include the pic as not all members are FaceAche users

Cheers

Todd

Chris,

Found this for you if your interested

http://www.ebay.com.au/itm/Nissan-Navara-D21-2-TD27-Patrol-GQ-U-TD42-Alternator-/130480888023#ht_2475wt_1141

Mark

Hey Chris,

Ebay mate.

They are a little dear but take teh opportunity to buy a higher rated one. The factory one is 60amps maybe 70 in some models but you can buy a 90amp or even a 120amp from...

I love how this thing goes down the track on only 3 wheels

http://www.nissanpatrol.com.au/forums/showthread.php?4440-Legal-Lift-Height&highlight=victoria+lift+laws

This link above should help but there is another thread in this forum somewhere with the...

I might add buddy, have you noticed the changes on the home page, it now specifies the 25 post rule for the manuals so it can be seen before registering. So your rant was not in vein.

Cheers Pete

'Owner Certified' lifts are limited to 50mm, so yes it will need 2 be engineered. Not sure on cost but a QLD member just got his certified with lift for about 100 bucks, really depends I guess on how...

I thought about fitting a ballbearing turbo but after reading up on them i decided against it due to the high failure rate and cost to rebuild one.
I fitted a .63 ar exhaust .50 compressor t3 t4 to...

thats awesome man!! The two tone needs a locker and would be unstopable!!

I just finished Simon Christie's 4WD Pro Tips website and It's now live.

http://4wdprotips.tv/

It's only a simple one page site but let us know what you guys think or more importantly if you...

Have you pulled apart your old starter motor?

I'm guessing it only started playing up after you got caught in that bog hole?

It may only need a good clean out and possible replacement of the...

If you have windows 7, you can resize in paint. Open paint, then click "open" find your photo and open it. When the photo is on the screen press control+W. This brings up the resize window. Select...

X2 Gman, 1x1x1x1x1x1x1x1 lol what a pain in the a$$. This is a cracker program, even for the not so bright with puters,