Search:

G'day Mate - Welcome aboard join in when you are ready and have fun mate plenty to do see and if u have any problems just ask and im sure u will get an answer !! Bucket loads of usefull information...

G'day Buddy welcome aboard
Great lot here with tons of advice and adventures and experiences,
Hang around, ask away and Join in where ever you feel comfortable.
Hope you enjoy the site as much...

Crikey - memory is ordinary, but I think standard on the front is 535mm from the centre of the wheel hub to the steel of the wheel arch on the out edge (not the plastic flare)

Someone might...

Gday mal welcome aboard mate, gotta friendly mob here full of great info and advice. Wheel arch flares, a lot of fellas here use plastic edge strip from Bunnings hardware, looks sh1tHot and is stong...

Welcome mate, good buy, if you think the TD42 is a strong motor without a Turbo it is a Joy with a Turbo bolted to the side mate, It just does Everything easier, Better fuel economy, easier hill...

G'day mate - welcome aboard. Great people, information and laughs on here mate, so feel free to join in and make the most of it.

Enjoy!!

http://i279.photobucket.com/albums/kk121/Bendero7/Public%20Album/th_021.jpg
There feel better now:049:

Penrite limslip 90, 85-140 or 140. I use the 140, fact sheet below.

http://www.penriteoil.com.au/pis_pdfs/1Limslip%2090,%2085W-140%20and%20140%20JAN%202011.pdf

DRIVE LINE;

DIFFERENTIALS; First thing to check is oil leaks (note: oil leaks may also be caused by blocked breathers, see third paragraph). Oil leaking from the front of the diff where the tail...

Although I've never had a car with diesel/gas, or taken a converted car for a drive, as a mechanic (and former automotive LPG fitter) diesel gas makes a lot of sense. By adding a small (about 20 or...

G'day all,

Auto hubs are the same GQ and GU, they are an auto hub (much the same as any other auto hub) except that they have a manual over ride that allows you to manually lock them in using the...