Search:

I did mine like this but didn't even bother cutting the notch out. Just clamped the seal over the top. Always intended on finding a better way but I've never had an issue in the 4 or so years it's...

This is how I did mine....

7818578186

I have a chinese ARB copy roof rack and just bolted
the Anderson plug to the roofrack mounting plate

Ran the wires up the D pillar terminating in a 50 amp anderson plug,
easy if I need to replace the light bar,, works a treat

Not suggesting to do this as I don’t run roof lights but have seen people run them down inside snorkel and into bonnet or run down snorkel under side hidden to avoid cutting into roof of body.

...

Do you have a snorkle? Run the cables up the back and bridge them across to the lay in the roof gutter then up the leg of the light bracket or roof bar/rack. Or as i did, drill a hole in the roof and...

about $30 a pair on Fleabay

Gas struts on 1997 through to end of Y61.

https://patrolapart.com.au/product/nissan-patrol-gu-y61-non-genuine-bonnet-strut

https://www.elite-electronics.com.au/In-Car_Entertainment/Speakers/Round_Coaxial/JBL_GTO-638_6-1_2_3-Way_180W_Coaxial_Speakers

These ones. I got them off ebay though and were a touch more...

Yes those were the model I bought, the CSC654.
I got two pairs for $109 per pair in sept 2018.

They were pretty easy to fit. I cut off the factory speaker plugs and joined the new connectors that...

On the mechanism inside the door (pull the door card off to access)

I had an RACV pre purchase inspection done on my car. It was paid for by the Car Yard, so not sure if the same as if paid for by the buyer. It was very thin on detail, but had a big warning about...

HT's service centre in Thomastown. George is a member here and has rebuilt his Gu a number of times. He's always keen to help people out to. Family Business that will look after you

Sent from my...