Search:

If it is a 12 volt panel (max output of 21 Volts or less) then that reg should handle it.

You need to connect the Panel output to both input channels IE twist the Reg Orange and Orange/Black leads...

I think it is a 32 socket if I don't have it wrong. Take a shifting spanner, and size it to the nuts' flat sides, an measure gap on shifting with ruler = socket required size. You will need to remove...

Do you have the handbrake drum on the TC or does it work from the rear wheels?
The seal in the pictures is kind of special and I recommend you get it from Nissan. If you have the drum as in the...

Td42 has a single mass/solid flywheel. The 4 terrain are good as are the exedy safari tuff. The price you have is pretty good, I paid under 600 for a safari tuff but the trade helps with that. There...

Solid flywheels IIRC...

I am not sure if the 4.2 is a solid or dual mass. Perhaps someone else can answer this.. Didn't realise is was a 4.2 just saw the GU part.

Thats real cheap for a 4Terrain kit still. The 4Terrain and the Exedy Safari kit are the two heaviest clutches. Both are not rubbish. I have sold both in my time. Both have failed people at times...

Had one driving a 350 chev 4x4 not a problem , highly recommend, comes with cool wooden box too.

I just fitted a 4terrain kit with the solid flywheel. I have dealt with the wholesalers of these clutches for 15years and know their product. It ain't garbage. Just remember to machine your flywheel...

Theres one in my gq. Great, done 50,000k towing 2.5t, mud, everything. Works great. Good feel. Still has heaps of life left!

you need to fill the resovoir and jack the front wheels off the ground and turn the wheel lock to lock a few times refill if required

Benny

Be carefull with your carpet. I pulled mine after windscreen leak and replace all the underlay with closed cell foam so it could not soak up water. The problem was after cleaning the carpet it shrank...

Hey Mate you might want to check out this thread http://www.nissanpatrol.com.au/forums/showthread.php?3172-Water-Driping-Inside Some ideas to look for
Cheers

Yep i agree with Tony, If you ahve not tuned the thing then you will be stoked with the potential.

Things you need to do.

3" Exhaust and Dump pipe.
Install a manual Boost Controller
Install...

Hi here are the drawes I made did not think to take any shots till after I started work fine :)