Search:

What a crazy day. Installed the water trap, then the lift pump would not draw through it. I left it running on prime for 10 minutes, bowl remained empty. Anyway decided to fire the engine up and it...

Ok, had some great technical support from the supplier of the re-badges flow meters - Scintex. I tried to remove the original units located in the impossible zone where I installed them, didn't...

AS we conversed in the PM's, the Willwood set up with Hydroboost over the top definitely works, however the stock pads from Willwood are too hard and take enormous amounts of heat to work, plus the...

We have moved on. Our latest blog post shows the Gibb River Road as few people get to see it & outlines how we have once again 'fallen on our feet'.

https://cuppa500.com/Blog/now-what/

Took a bit of quiet time yesterday to concentrate on the replacement AP60 Cruise control system I installed after munching the original up with a shredded belt. I have not been able to get it to...

I haven't been here as much as i want to be. Life, and life issues getting in the way at the moment.

My Patrol hasn't been used in a long time. The only time it does get used it to go out and...

Bit of a frustrating day Sunday. Recalling my major fuel contamination issue, I disconnected the flowmeters from the fuel system to isolate the problem, then left them open ported to the atmosphere -...

gidday I am a newbie my name is Dave,
I own a 2003 GU111 STL with a 3.0litre motor and manual trans,my wife and I bought it new and have 330,000k's on her.
we have replaced the clutch from a duel...

Went chasing two electrical gremlins. The first was no power within the horn circuit. I wanted to add a small but loud air horn to supplement the pipsqueak pip, and then could not get it to work. 4...

Swapped over the generic canopy and trundle drawer whale tail locks to a 1KeyCo.com lockset, huge difference in build strength and no more generic keys that every tradies has on their ute. 30,000...

I check once every few days. I have a "Whats new" link to the forum on my hot bar. 8 times out of 10, it won't load.
I haven't been post active... But...
I've been doing a few things to the Patrol...

Revising interior.

So I ended up buying the back piece for the vinyl upholstery and finally had the chance to install it today. On Cuppa's advice, took the opportunity to rip out the felt that...

OK, reliability testing continues. The little green plastic knob battery post isolator, brass on brass decided to shit itself on the way back from the High Country on friday, finally fell apart 500m...

Hi Gregork. Thanks so much for all that info - absolutely nailed it.

Hi Cremulator. Thanks so much for responding. From another reply on my thread I think it's year of manufacture is 2001 (assume you meant that, and wrote 2010 as a typo?).