3rd December 2018, 07:04 PM
Ok so there might be something like this about but I thought I’d share what happened to me.
So I set out to test if my common rail relief valve was holding rail pressure, refer the the image
Start...
8th December 2017, 09:21 PM
A couple from a recent build of mine.
Bloke wanted a full canopy that can be lifted off via roof rack.
Twin 35's on the back, full roof rack.
Come up...
11th September 2017, 09:30 PM
-13 will stay under the flare just, -22 will be just outside the flare. as for srcub i used to get the tiniest of touches to the inner guard when flexed to the max but nothing to worry about
18th August 2017, 09:41 AM
With the 200 kg rear springs in mine it is like having a 4 inch lift at the back. Gave the Trol a nice rake. When fully loaded & towing the boat it sits pretty much level.
Couple of before & after...
16th February 2013, 02:19 PM
Qld is as follows:
2" maximum increase in tyres permissible (33" or 285/75R16 - basically 33" either way as outer diameter)
2" maximum increase in spring height.
2" maximum body lift.
You...
16th February 2013, 02:08 PM
There is a thread on it somewhere but basically Aus wide 2" lift and 285s on 8" rims thats it
after that you'll need engineers report
11th November 2010, 04:57 PM
There is a lot of information to put in here so this post/thread will keep growing over time, I'll add photos as I can.
This is by no means a complete or definitive guide, my aim is to give people...