Search:

I have always stuck to the theory that if you can't tie knots, tie lots.

Sent from my SM-G935F using Tapatalk

You can buy these panel mounts from Narva that clip together and will fit in the hole left from removing the ashtray with a little amount of adjustment.
...

I did a similar thing there but left the ash tray intact. Remove the ashtray to get to the fuse panel mounted behind it.
The red rings under the outlets are just to indicate 'always on' connected to...

Most ppl make a plate the same shape as the ash tray lid and cut 3 holes to except carling style swithes.
If enough are interested Ill cut a heap in SS they wont break the bank. looks tidier as well

This is what I did for the same reason kids. Middle is a dual 4.2a usb with cig plugs on either side.

http://www.nissanpatrol.com.au/forums/images/imported/2018/03/64.jpg

Sent from my A1601...

Hi mate,

Nice work. did you fuse it? and are you running more than 1? what will you do with the gap?

Consider one of these and maybe fit another 2
...

I have front disconnects. Hate it on road with it out, but it’s a little nicer off-road with it disconnected. However I got them for free, I wouldn’t buy them.

I removed the front on mine and noticed the difference. Just keep it in the garage somewhere.


Sent from my iPhone using Tapatalk

yep ..................

If it is just your normal 4 wheeling you are doing, then you don't really need them.

My lift will tuck up all the way up into the guards so it touches on the inside of the tyre with them connected...

I wouldn't bother to be honest mate. I had them on my GQ and they were a pain in the arse to get back in. You will get more from removing the front and keeping the back in as it forces the front to...

Congratulations on your life sentence. :)

Get some pics up mate. Will help us a lot. If you can see oil on the intercooler itself. Its leaking. Bin it and get a tigged one. One way to stop/ slow the oil is to instal an oil catch can on the...

To me chances are your intercooler is leaking, it will need replacing with a fully tigged one from say Diesel Smart.
Being a 3ltr dont go the big IC not worth it on such a small motor, read up on...

Not really "near" Mandurah.
I'm in Gosnells.