Search:

Same grommet and same as 3D; coat hanger wire and tape FTW.


Sent from my iPad using Tapatalk

Brush cutter cord & insulation tape is awesome i reckon.

Yeah done mine the other day that way as well. It's a PITA due to the break booster, but doable...

Yeah coat hangers are perfect for this job!

Grab a coat hanger and cut it , so you can straighten it, then tape what ever you want to
pass through the grommet to the wire, tape about 4' or 100mm.
Anyway thats how I do it others may have a...

As TD said, did mine last week, had to tie the cable to a thin bit of welding wire 1st

Big rubber grommet on the firewall in front of the driver. RHS

Ok, I’ve been waiting for someone else to ask, but no one has.

What is the purpose of this ‘cobra head’ thingo? Is it just a means of improving airflow by virtue of a bigger hole in the top of...

on the drivers side through the big grommet

Loving your style Shazlic keep the mods coming ,eh
There is a block you can buy that fits under the OE boost sender
I just brought one $50 makes it neat easy and no drilling...

Very nice give Mudski a few days then PM him about setting up Nads after you fit your gauges.
Clean example thats for sure, well done.
Good score with the 04 mags too
I have cover plates for where...

Looks like its in good condition from the pics.
Was it basic road km?
Be good to see the modifications installed.

Finally finished setting up my reversing camera for the VMS X506 in dash unit in my 2008 GU Troll. I used I CMD17N from Parkmate and it tucked away nicely underneath the Patrol badge in the left barn...

Thought I'd post some pics of my boost and EGT gauge setup I recently did.

Fabricated my own bracket from a piece of aluminium, covered in matte vinyl and connected the gauges.
The aim was to...

This pic shows the position of the Mass Air Flow sensor (on my ZD30) on the top of the air filter housing. Shown here with the wiring cover removed....