Search:

Yeah, if it's a GQ you're looking at taking it somewhere to pull the bearings out. Also you need to undo the bearing nut before that. That's also a back breaker unless you got the specific tool or...

I first try the site search but I find the search on this site is crap( sorry Andy) so I usually then try google and put in nissan patrol forum aswell and have better luck that Way.

Check that the inside of the tyre is not rubbing on anything that's what was causing mine to make noise on lock.

Does that noise change when going in other direction e.g. turning left the noise is there but turning right is not? If the noise is emanating from the side which when turning is under larger load...

I have had mine rebuilt and serviced at "the transmission center" at underwood. Nice bloke. Needs a little bit of chasing up for rebuilds but fine for the service. I can't comment on the price tho,...

Had the same thing happen,it was an aftermarket immobiliser as mentioned above ,we found the fuse that contolled it and removed it

Have you got an aftermarket immobiliser/central locking? Sounds like something to do with it perhaps

Hey guys,

Visited the new location last month and had a great day out. Took out the new Patrol, mate had a new Prado. Great tracks and great views.

http://www.scenicrimadventurepark.com.au/
...

Check out online auto parts. They are at geebung so can pickup or have it delivered.

You really only want to use genuine bushes. Also if you dont mind waiting places like nizzbits, patrolapart,...

Have a look at your control arm bushes.

Hello and welcome to the forum ,plenty of info for you here,
jump in anytime and enjoy

First I'd be checking tyre pressures 35 psi for all four should be a good starting point

Not that I can help any, but obviously start would be checking all components for loose nuts or bolts.

Welcome mate, surely the best forum on the net.
If you need it, you can get it, if you want to know it, just ask it.
If you want to find it, go to the search bar for a universe of information....

hi paul
my advise is ,,
if you have to ask this question
then mabe its a learning curve to be taken carefully, nothing hard , just cleaning perfectly , repack em ,
the hard part for a novice...