OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Page 1 of 4 1 2 3 4

Search: Search took 1.00 seconds.

  1. mate save yourself grief 10-40 is recommended...

    mate save yourself grief 10-40 is recommended just stick to it. it has been well written about on here about using the correct oil personally I use penrite
  2. I've used delo400 on my CRD for the last...

    I've used delo400 on my CRD for the last 20,000kms, it loves the stuff..

    Cheers
  3. It meets all API and JASO standards required for...

    It meets all API and JASO standards required for the CRD so no reason not to use it. As stated above unles you drive in extreme temps it will be fine.

    I've used it on my last 2 patrols, both CRD's
  4. 56540 Unless your climate is going to be below...

    56540
    Unless your climate is going to be below -10 deg, it should be fine.
  5. most here that use Delo 400 have Di motors from...

    most here that use Delo 400 have Di motors from memory.
    but there is plenty written on this, Have a search and see what comes up
  6. Some vehicles over the years rust more than...

    Some vehicles over the years rust more than others, take the back window frame of a GQ that would be one of the first places to look if buying.
    Gu's dont seem to have inherited this problem, rust...
  7. [QUOTE=Rock Trol;574680]These photos show the...

    [QUOTE=Rock Trol;574680]These photos show the Runva 9500-Q winch in the Nissan steel bar.

    54220

    54221

    This pic shows the control box mounted inside the bar out of the weather. Top is...
  8. http://www.nissanpatrol.com.au/forums/showthread.p...

    http://www.nissanpatrol.com.au/forums/showthread.php?31944-Runva-11Xp-Install-to-Genuine-Nissan-Bar

    Dunno if its too late but I started my install with pics tonight if your interested

    Cheers,...
  9. Our mechanic at work spent years working in the...

    Our mechanic at work spent years working in the mines in SA and WA, and reckons the crew cars fitted with these things had zero rust / corrosion compared to vehicles without the rust protect fitted....
  10. I had an ERPS installed in my D22 Navara. This...

    I had an ERPS installed in my D22 Navara. This truck practically lived on the beach most weekends and did a lot of touring across WA. When I sold it there were no signs of rust apart from maybe some...
  11. I have a CAT system from WA and it seems to work....

    I have a CAT system from WA and it seems to work. There is a small area of bare metal where I have dragged my foot when entering/exiting and I have left it bare so I could see if rust developed. Will...
  12. From all the units I looked at they all specify...

    From all the units I looked at they all specify to be connected to starter batteries so unless it was a diy install on the aux the unit shouldn't have any affect on the aux, if it was fitted to the...
  13. Have a read of this ...

    Have a read of this http://caravanandmotorhomebooks.com/retarding-rusting/
  14. Dyneema [tm] has been around for a very long time...

    Dyneema [tm] has been around for a very long time , first it is much safer to use as it does not store energy
    like SWR, If Dyneema breaks is just falls to the ground ,so less chance of injury. It...
  15. These photos show the Runva 9500-Q winch in the...

    These photos show the Runva 9500-Q winch in the Nissan steel bar.

    54220

    54221

    This pic shows the control box mounted inside the bar out of the weather. Top is exposed a little but the...
Results 1 to 15 of 50
Page 1 of 4 1 2 3 4