Sounds like you need to replace the glow plugs AND the advance plate, go genuine glow plugs tho.
The plate and 0 ring replaces the existing plate, it has a raised section which advances the pump....
Sounds like you need to replace the glow plugs AND the advance plate, go genuine glow plugs tho.
The plate and 0 ring replaces the existing plate, it has a raised section which advances the pump....
make sure the crank angle sensor is plugged in correctly, also apparently if the sensor has any dirt on it they can play up. if its damaged the computer doesn't know when the engine is at tdc etc.
Before you start it, is the fuel primer on top of the fuel filter hard or soft when you try and pump it?
And when you say you double glow it... Try using the airbag light as your glow plug timer....
You can get the required parts from "nizbits" a vendor on this forum.
Cheers, the ferret.
Ok jus got around to doing the hot start fix found it was really easy took around 20min to do and that was with taking pics so should take around 10min have uploaded some pics of the job this is how...