Search:

Haven't heard this before bushy but I'll see if I can find anything out regarding this.

Be lucky to get change from $350-$400 for a new , genuine late model wheel.....quite outrageous.
I'll be going the pulsar wheel soon enough.

Sent from my iPhone using Forum Runner

Thanks Bushy!

I also made a couple of little brackets and put a slight fold in them to kick it out a bit further
http://i17.photobucket.com/albums/b63/pb72/IMG_0219_zps205b9968.jpg

Pretty mmuch the same mate, body and engines are the same. Although level of fruit and seat trim maybe different. Price wise, seems about right to me. Sometimes you pay more sometimes less.
...

There's no replacement for displacement =]

Winnie and I did a idle test just for shoits and giggles in the high country.
Was a 15-20 degree rocky incline
Mine a stock as a rock td42 and Winnie's td42 turbo 3" exhaust and high flow filters. ...

Hmmm nothing in this post makes sense?? Sorry.

With a turbo it gives you better low down grunt and don't need to have it revving flat strap. Is that how you have to drive a 3.0 crd. I now have...

My 93 TD42 is a silvertop and I fitted a Gartett turbo at around 360k. I did a compression and leakage test beforehand and my mechanics were happy with the results. I've done about 60k with the turbo...

You don't lose any of that low rev crawling ability with addition of a turbo on a 4.2. If correctly sized the gains will be very worth it. You are comparing to very different things with the crd and...

mine has 350,000 on and I plan to turbo soon. Just going to get a compression test done and if all good go for it! I'm not trying to create a monster so it wont stress an old motor to much.

I think Berrimah Diesel turboed a high mileage GQ with no problems whats so ever.
From memory it had 500,000 k so just run in really, they may have it on there web site.
Its their daily driver ATM

Loosen your fan belt and spin the alternator, and water pump by hand, and you might be able to hear if it is the bearing. I got muddy water in the alternator last year, so I replaced the bearing, but...

Thanks for the help guys

Haha All of you helped... cheers guys....