Search:

This is what you need....
http://www.ebay.com.au/itm/Oil-Pressure-Gauge-Adapter-1-8-NPT-BSPT-Brass-SAAS-T-Piece-Sensor-Sender-AFGA31-/161870084028?hash=item25b03577bc:g:qbYAAOSw-itXqC-N
Tis' what I...

It sounds about right mate. I got something along the lines of 95 @ wheels, on 33s and that is with a beaudesert 2.75" and a unichip on my CRD.
...

43523

instructions on sun visor

The pushing "down" movement is simply a safety lockout feature, designed so you do not move the lever too far into the Low range selection accidentally while the vehicle is in motion.

Pushing down...

Hi mate,

There should be a placard on the drivers sun visor, it says when changing between 4H to 4L or 4L to 4H to ALWAYS STOP your vehicle.
Let me know if it's missing and I'll take a picture...

I Plumbed up my system with Ford heater hoses as they have a flared end that fit the provent perfectly . Here is the link...

Here's the pictures of mine. The fitting kit makes it look like nearly a factory fit.

go to your local super cheep store and for about 30 bucks you can get all the parts
western filters kit too expensive some one uaed a holden hose thathas flared ends that fit cant find the link but...

Did you purchase the "Patrol kit" from Western Filters? If you did then it comes with everything you need. Installation is pretty easy, just follow the instructions. I can take some photos of mine on...

Hopefully Hodge will spot this thread as he has recently done this to his CRD. Its not really hard to do. The hardest part is mounting the can. You also need to make adaptors for the 1inch ports on...

Bung in their exhausts is standard I've ordered 3 so far. Good people to deal with.
I should mention that when my exhaust was fitted car definitely overboosted.

I've just installed one in my vehicle and I've had no problems with over boosting.

I would recommend getting a ScanGauge or boost gauge fitted so you can see what's happening.