Search:

Deposited what I can.

Sorry , I'm unemployed at the moment but gave what I could.
I feel bad cos I would give everything I could, if I could.

Easy enough to make one. You just need to lift the anchor point of the diff upwards to the same height as the lift is. Or there abouts.

You'll need a extended bias bracket.
It pretty much moves the valve the same amount of the lift, so it's back in the original position.

Sent from my XT1068 using Tapatalk

Assuming the calipers arent seized and the brake fluid is good etc etc.
The bias valve affects the rear brakes. If the Patrol has been lifted this will affect how the bias valve works.

Sent from...

Yep Stauns maybe slower (but then again probanly no slower that having to go round and deflate each tyre one by one) and a pain in the arse to initially set up, but once done, stick em on and let...

I forgot to mention... If you're after a challenge there's some sections on the power line track which are pretty full on and would challenge a lot of well equipped vehicles and skilled drivers too.

Well some good news finally!

Came up with an idea to have no oil drain or fitting on at all and simply have the oil draining from the turbo into a funnel into the sump.

This eliminates every...

A 12 hour job that is gunna end up being an 18 hour job. I straightened the LH side by undoing all the bolts on the arm and using a hefty G clamp and 12mm thick piece of steel across the bent piece....

The wife did our last night online, we lost the pin and couldn't do it on the night. Haven't had a knock on the door.

Sent from my XT1068 using Tapatalk

X 2 yeah looks great with a slight down hill look.
Whats next after your wallet recovers lol rear 1/4 chop
or too radical??

Yep looking good mate

It didn't happen today unfortunately :(

Welcome back, nearly 5 mths between post. Lol

Bet you can't want for the 4" lift to go in.

And your choice of suspension is.............

I fear that won't happen lol but maybe someone will make a bag to put gear in ?

We do have a few female regulars Kathy that get involved but I agree, would be great for the partners of the forum to get involved with other aspects of what we love.

Having saying though, if my...