Search:

As close to the turbine as possible will give you quicker readings, but up to 20cm should be ok.
Also, the tip of the pyro is the sensor, so just go in about 10 to 15mm for best results.

- Use the same "walking" method to remove the turbine seal from the turbine shaft.

http://i239.photobucket.com/albums/ff165/jusmx141/T3%20Rebuild/T3Rebuild16.jpg

- Here is the turbo...

Autron make GU pillar pods, check this link; http://www.autron.com.au/newweb/index1024.htm

Tony

Ask anything you want, we're here to help.

Tony

How much airflow out of the vents do you have when you start driving and how cold is the air? When your A/C gets to the point of not pushing any air out of the vents can you still hear the blower fan...