Search:

The 2.8 in the GU was near the end of the design life and was well run for many years in the GQ first so any real dramas where sorted. They can be tuned for reasonable performance and if you get a...

Crack heads easy they are good if you drive them right. Prob better getting a 2003 zd30 instead

Weather for Kununurra today is 37 deg. Niiiiiiice.

Still waiting for pics. lol

In my opinion it depends, how long do you intend to keep this car? if you change cars regularly every 10,000 is fine. If you want to look after the engine and keep car long term, change oil and...

As above remove smaller screw on the plastic tab, using long nose plyers pull the other one up. there are 2 snap fit locating pins. Bit fiddly but come out ok. Just make sure they are fitted back in...

In mine there are 2 screws one small one and one really long one which acts more like a pin than a screw. remove these 2 then a small amount of pressure and she should pop out.

Hi/Lo Gool as suggested go to auto shop and get a suppressor, that should stop it, mine did that a few times as well but not any more, go figure

Any decent noise suppressor filter capacitor whatever you like to call it should solve the problem.

vac booster can also cause this.
a shim or something can drop off inside and causes a spongy peddle according to a manual I have.

I've got a similar thread somewhere??? And it's anything between being a stuffed master cylinder or stuffed proportioning valve. I'm hoping master cylinder in my case as I've bought one and it's...

Thanks Mate, only new to the forum but more than happy to share my thoughts as others have done for me, has to be best bunch of guys on the PLANET

Good ya hear positive feedback
Onya Three Dogs


---
I am here: http://tapatalk.com/map.php?ko1vlz
Tap, Tap.......Who's there?

Just so you know how they work they move in and out, giving low and hi beam [ telescopic ]

Just PM me if you get stuck. Cheers

The ones you have 3000k will be yellow , 4500k to 6000k will give a whiter look