Search:

The regulator you are referring to is the A/C thermostat. The two wires coming out of it operate the clutch on the A/C compressor, and the copper tube (filled with gas) is placed in the air stream...

Hey mate
God inverter got security for voltage limit. Mine is PSI - german from origin - stops when battery goes down below 9V.
And this is enough to start the engine. Thus You don't need to worry...

First thing to do is install a headlight loom with relays and bigger wires than standard.
For the headlights themselves the legal option is to fit Hella or Narva semi sealed inserts (that's the...

Man, 2 KW, that is one BIG Inverter for a reccy truck... wotcha running of it?

Anyway...

1. As above... altho I would allow even more as I doubt it would be 90% efficient possibly closer to...

Assuming a good efficiency of about 90%, it will take about 90amps at 1000W and 180amps at 2000W peak. From this website http://www.powerstream.com/Wire_Size.htm it appears that AWG 2 would be the...

4.2 Diesel takes "about" 11 litres to fill if you replace both oil filters, but as MQ MAD said, fill by the dip stick.

If you pulled the sump plug out and no oil came out, you have a problem....

Oil amount is best checked with the dipstick
With the workshop manuals here i only use fluid levels as a guide

9L of oil gone from a 20Kl trip ???
If its not on the road,or excess black smoke...

I take it from point 1 that you changed the engine oil?

The noise you describe is coming from the gearbox. The reason you can't hear the noise in 4th is because that is the only gear that does not...

With the current weather we have only had social events recently, but there are some camp & day trips planned in coming months. We meet on the 2nd monday of each new month @ the north mackay bowls...

G'day bloke.

Glad to have you onboard. Love to hear about your truck in picture form.

Take care out there.

Ross
DX grunt

Welcome 2 the forum,

Great bunch of guys and girls on here always willing to help out where they can.

When you get a chance stop past the members map thread and post up you location in QLD so i...

Hey buddy, Welcome aboard the Trol express,
Great bunch of people with a s*** load of knowledge, experience and adventures to share.
Plenty of good laughs along the way as well.
Surf around and...

You can but it shouldnt get that hot....If you can't hold it with your hands then you are putting too much heat on.

You will know when its ready, start peeling the corner and it will be very...

Ive never tried to remove tint but was in the signage industry for 10 years so this should be the same principal.

Heat the window up using a heat gun (hair dryer would also work). Careful not to...

Use a heat gun or hair dryer to soften the adhesive. Any adhesive remaing on the windows can be cleaned off with a razor blade and window cleaner.

Tony