Search:

I have found that the second stage of the carby can gum up, so its a good idea to flog the engine occasionally, to ensure everything is kept working. I give the little donk a hiding on the sand dunes...

is the top end noisy

I bought the 12000lb one with rope. Used it once so far and it pulled me out of a pretty horrible spot without any issues. The brackets for the control box are rubbish and mounted it on my own...

Got one the same on my bus, pretty happy with it for the $$, I threw the wireless remote side in a box in the shed its just useless, make sure you lather all wiring points with plenty of petroleum...

The brother has had one of those for a couple of years now. Got him out of a fairly bad situation a couple of months ago. I was impressed enough that I now also have one. Bit slower maybe than a...

I have had one for 2 years now - happy with it. The only thing I didn't like is the control box mounting is above the cable spool. First time I used it the control box mounting brackets were damaged....

For a price point winch they get the job done mate.

Which fuse are you checking for the tail lights?

Have you checked/replaced the reverse light bulb?

Have you got a Multi meter? If so take out the fuse and turn the lights on and see if you have 12v at the fuse holder? If you do then you know which side of the fuse your problem is. Just take an...

Have a look at the actual fuse connections as well, I had some dramas with mine, I pulled the fuse and it looked fine and I didn't notice that the connections in the fuse block were all old and...

Do both head lights work?

Do the front Parker lights work.

I'd check your fuse again for a start. Even swap it out with another just to confirm (cheap)

Also put it in reverse with the ignition on ut engine off and check...

Welcome to the forum, X2 on the hi-clones being a gimmick along with magnetic pellets in the fuel tank,
Smoke and mirrors

G'day mate, skip the Hiclones they're a gimmick.

Welcome to the forum mate, feel free to ask any questions.