Search:

Fyrlyt have a pretty awesome output but they would want too as they pull a poo poo load of current and the globes are unique so are therefore expensive and can be hard to get.
IMHO I would spend the...

have you tried downloading the Nissan fast software?

Zeeman,
this is just to say g'day to someone from the old country while you wait for someone who knows something to help.
Never had a 2.8 so can't help. Presume you've downloaded the appropriate...

The poly is too hard, and cracks very quickly under constant articulation, when offroading.

If you are only driving around the roads, with the occasional bush track, they would be OK.

Mic

good Choice mate

No definitely NOT.

Leave teh Nissan Rubber bushes right where they are and replace them on a Needs basis with new quality Nissan Rubber bushes. Poly bushes are Junk and noisy...

Iron Man are available over here mate.

http://westcoastoffroad.co.uk/


Just another option for you.

agree with the others, option #1. as long as you fuse the link and with less than 1 amps current draw I wouldn't worry about the relay.

Just hard wire with a switch or if you change a few existing park lights to led also put them on the same circuit

Option 1, you only need a suitably sized relay if the load is greater than the switch rating. Less to go wrong as well.

Relay is not necessary with such pissy current draw mate.

Depending on what your using the paint for even from new Nissan colours where never close matches off the machine especially there metalics. If you just want a touch up pen there available from...

Hi!
Check glow plugs first, then check nozzles.
I reckon that the fuel pressure in the nozzles at the moment of open are wrong.

1. Remove steering column shroud
- 3 screws
- remove key surround
- with a small screwdriver, gently force the two shroud sections apart.
Insert the screwdriver where the 2 stalks enter the...