Search:

Not surprised that Nissan took the easiest option. When I fitted my rear steel bar I noticed that one of the bolts holding the tow bar on had a slightly different look to the others. Went to tighten...

Glad you got it sorted, fairly easily.

I was going to say use a bus bar or you can do what I'll be doing.

Use a fuse block in the passenger kick panel like this one
http://m.ebay.com.au/itm/301518048768?nav=SEARCH

You then simply...

g-day mate...
maybe something like this from Ebay...

dont forget to fuse it near the the battery

To easy mate. Yea 1am no one was home anyway lol. Off in the land of nod..
Hopefully you'll get it licked now.

Nice work mate, looks like it came together nicely - hopefully you get the controller issues sorted out quickly!

I just followed the standard colour coding and it all worked the right way. Double check you have gone blue to blue and yellow to yellow.

That blue cable is the antenna for the remote. It is wired to a separate unit which feeds the solenoid along side of the plug.

If you open the unit up you will see 2 red wires running off the...

Hi Smoothrun..

I should have written solenoid not control box. According to the web site they are: "100% Waterproof competition grade solenoid". The box may not be waterproof but the solenoids...

Yep, I know what you're saying. I got stuck a few weeks ago and had to winch, but all worked well. I still don't trust the wireless bit (worked fine on the day) thats why I put in cab whinch...

I'm in ferntree gully, so if you want to have a look at mine to get a idea your welcome to come around

Yeh I was about to ask if you had any thoughts on mounting options.... That was one that had me stump for a while, I ended up mounting it off the crossmembers for the bulbar

5455054551

What...

I built a flat bracket that spans the chassis rails above the winch and mounted the control box on that. I think it was the small red wire that goes from the main positive in (from your cranking...

Flip it over and rotate the gearbox and bolt it in, straight forward. I have the same winch and bar also. You will need 10mm longer bolts in the top holes that hold the fair lead in. Plenty of pics...