27th January 2016, 11:28 PM
Go to a Car Yard with a GU on the lot and take a diagonal measurement from each corner of the bonnet to each corner of the scoop. Using those measurement you should be able to get it pretty well spot...
27th January 2016, 11:23 PM
I could measure the dimensions of mine if you like otherwise Patrolapart have new bonnets already cut that you just need to get painted.
16th April 2014, 10:59 AM
Ordinarily I would say no .....
But there is the known problem with the 2.8's where the Harmonic Balancer Keyway flogs out, and the harmonic balancer can fall off.
I would be starting here, as...
18th January 2013, 11:34 AM
Cornell fuel injection are good, but I see you have already booked it in with them, but i though I'd just chuck their name in for others to see.
9th January 2013, 07:40 PM
I had the same prob mate, but I was able to use the needle nose pliers try spray with crc or wd40 give a bit and try again other wise do the bigger hammer trick and try get a set of needle nose with...
12th December 2012, 11:24 AM
G`day welcome aboard for another 2.8
12th December 2012, 10:15 AM
Have a look at this
http://www.dse.vic.gov.au/__data/assets/pdf_file/0017/101546/FS0025-Circuit-Road-Mt.Stirling.pdf
My Avatar is a Pic of the King Basin taken from Craigs Hut
11th December 2012, 10:24 PM
Easiest way i can explain, go to settings top right of screen, then down the left hand side of page you will see subscriptions, click on that and have a look.
You can subscribe (No strings) then...