Search:

been having troubles with my y61 sliping teeth inside front free wheeling hubs so i replaced them on to chew the new ones out in about 3 hours. thinking it was somthing major turns out some after...

39667

Dredger - Porcupine Flats Vic.

There is an easy fix for this as Ni$$an wants you to buy new lid for $275 or so.
Just visit CBC Bearings establishment and get "O" part number BS445A.
Fits like a glove is made of rubber and it...

Old cart outside Peterborough

G'day folks,

I cannot get over the customer service from overseas v local customer service! I recently purchased turbo stainless steel T/Bolt flanges, aluminum inter-cooling piping and silicone...

Okay. The issue I had was when I wound the window up it was going back down a few inches by itself after it reached the top. What I did to fix it was to remove the motor from the reg, plug the reg...

I agree with Yendor, and think it has something to do with the Limit Switch being out of whack.

34131

Here is the reset button for the window limit switch

Gday, recently had same prob n flashing on/off int light coz of door. Used impact driver to untension U plates, tapped em inwards with hammer, slam doors, retension.
Problem solved, can even notice...

Careful naming and shaming..... I am all for it myself!!!

G'day Clunk,

Well stated mate and so true, there is definitely those customer's out there that constantly whinge for the sake of complaining!

On the weekend in Coffs Harbour there was a...

Very well put RLI but there is a but and that but is the customer who makes unreasonable demands, ones that are unfortunately not possible to fulfil.
Now before anyone pipes up, I'm not saying...

G'day Trendsetters,

Another one of my pet hates, is businesses that are so arrogant (that far up themselves) and because they think they have a good product, they think they can treat there...

Kast, I would not recommend any brand or model of a brand as all our needs are different.

The high end Konis are supposed to be the best for outback rough tracks but how do the perform in the bush...

Well not me exactly...


Blokes, my misses is finally preggers!!!

It has taken 12 months and I was completely over it and lost hope, lots of crap times around our house in the last few...

AB I move we lock the Manuals section up and access to forum sponsors only. Let it be seen by all but access to the links requires a 12 month sponsorship. $20 is pretty cheap for ALL OF THE MANUALS