Search:

G'day jens,

The tough dog range of shocks are a mass produced budget specific shock for the world market, if you have a look around on forums across the net you will find many many mixed reports...

Hi mate and welcome to the forum. Great bunch of people on here.

Jas

Welcome to the forum mate

G'day mate and welcome aboard - great people, information and laughs to be found on here, so join in to make the most of it!!!

Enjoy!!

welcome to the forum ,enjoy

Welcome to the forum mate, feel free to ask any questions and join in the conversations.

Hey all

I have noticed lately there have been a few posts about smoke from diesels etc the colours and all that and what it means so i thought i would post up this link to help all those looking...

The turbo is pressure fed oil from the engine. The oil in the intercooler, pipes and inlet manifold is condensed crankcase ventilation vapour. The oil coating on the inside of the intercooler reduces...

Free download of our first Nissan Patrol magazine (November Issue).

As time prevails these magazines will get bigger and better. Any feedback or ideas are welcome for the next issues!

NOTE:...

SUSPENSION;


RADIUS ARMS; The front radius arms are the arms which extend from the chassis forward to the front diff. Look for cracking or perishing of the bushes. To do this you will need a...

**BRAKES AND STEERING ARE CRITICAL SAFETY SYSTEMS DO NOT ATTEMPT TO SERVICE THESE SYSTEMS UNLESS YOU KNOW WHAT YOU ARE DOING**

BRAKES; The vast majority of GQ/GU Patrols (and Mavericks) were...

DRIVE LINE;

DIFFERENTIALS; First thing to check is oil leaks (note: oil leaks may also be caused by blocked breathers, see third paragraph). Oil leaking from the front of the diff where the tail...

There is a lot of information to put in here so this post/thread will keep growing over time, I'll add photos as I can.

This is by no means a complete or definitive guide, my aim is to give people...

This pic shows the position of the Mass Air Flow sensor (on my ZD30) on the top of the air filter housing. Shown here with the wiring cover removed....

No worries. Took my plate off and redrew it in Illustrator.

There's a few reason to do it. I guess the ultimate being that it's increases your fuel economy by up to 25% and it's actually cleaner...