2nd January 2014, 02:12 PM
Hate to be bearer of bad news but white/grey smoke would mean a stuffed turbo.
Maybe some others could confirm this
26th December 2013, 11:17 AM
He was throwing a "grenade" joke at ya mate. It's a thing you learn to cop with 3L's. I get it all the time. LOL
On a serious note mate, does the "squeal" you get rise up and down in pitch with...
13th December 2013, 06:01 PM
OT but I have to laugh at myself when i go over posts I have written when I have had a few too many beers. Which is often... I read dirtygu's post as he had a GU11, as is eleven. Haha!!! GU11 as in...
12th December 2013, 12:15 AM
That's funny no wonder he had so many goes at it, I wouldn't want to get pulled out by that either. Then again I drive a patrol so wouldn't have to get pulled out.
Sent from my iPhone using...
11th December 2013, 06:43 PM
11th December 2013, 02:39 PM
so that's palm creek crossing
10th December 2013, 12:09 AM
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=37821
9th December 2013, 07:40 PM
You can talk...You have a petrol motor! EWWW
9th December 2013, 07:35 PM
What! Nothing for the ZD30?!
2nd December 2013, 09:10 PM
Reading the front page of the local paper that the Penrith Liberal MP has earmarked a restricted use dirt road that leads down to a beautiful spot on the Nepean River as the path of a new bridge over...
2nd December 2013, 08:29 PM
That injector pump has no cut off solenoid, it's a "pull stop" Bleed the be jesus at the pump, loosen number 1 injector, whiz the crap out of it , when it starts, tighten the injector, the cut off...
2nd December 2013, 06:29 PM
Do you have a shroud setup on the Thermo's????
Trust me, thermo's will make it overheat on a hot day, on hills and where there is lots of stop starts without a proper shroud setup and I mean a...
2nd December 2013, 08:13 AM
@ Dirtygu a 3' exhaust may suit you better being a Di, the 2.75" seem to suit the Cr better for some reason
2nd December 2013, 07:35 AM
have your nads ready to install at the same time
27th November 2013, 10:28 PM
You can't crack injector lines off on the CrD (common rail), it is highly dangerous and lines have to be replaced everytime they're undone!
On Di you can bleed the lines by cracking them off but it...