Search:

Yes Matt has posted up some good reading and is very interesting.
Temperature drop across the turbine is part of its operation though and the cooling and expansion of the gases is what drives it....

You really need to stay away from the so called high flowed turbos.
Either machining housings for a different CHRA or whatever.
The standard compressor housing is not large enough to cope with...

I've been alittle slack in welcoming new members cuz I'm usually on my phone & it's a pain but "Better Late than Never"

WELCOME Aboard - you'll find these guys & gals to be full of Useful,...

Diy as a kit

Another vote for Matt at United fuel I have one of his TD05s The 18G and I can tell you you will be very Impressed with the turbo and the service they give.

Dont bother with high end modifications to the HT18. The extent I would go to would be an exhaust side high flow if you are chasing anymore than that then a turbo swap out is the best option. And at...

Might be a good idea, depending on how badly bubbled it is you might still lose them because they might have to scrape the window....

You'll definately need a steamer to get it off then and you'll have to use a really fine grade of steel wool to get the glue off especially if the glue doesn't come off with the tint, might just be...

You need to use a steamer to get the tint off a window with demister bars and take your time so as not to take any of the bars off at the same time, depending on how old the film is it shouldn't be...

yes you can damage the demister.
ie-- remove the metal from it and no work any more.
power wont pass to allow it heat up.
seek pro advise and or quote.
Cheers

G'day and welcome to the forum mate





........... On the move

Welcome to the forum mate

Thanks for the welcome guys! As for this taslucas bloke, he even turned up at my wedding and stood beside me??. And yeah I cut my teeth at this paddock somewhere. Lol. Well I just pulled the mav...

HEY HEY! You made it! Good to see ya onboard mate:)

Itsamav:


http://www.youtube.com/watch?v=KrjE1Kgy8pA

Welcome mate, as I've already taken the P!$$ out of the other two Tasmanians that recently joined the forum, I wont say a word.

Mate this is a great forum with good blokes, although I am sure we...