OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Page 1 of 14 1 2 3 4

Search: Search took 1.00 seconds.

  1. Too easy, I've got most of it sorted out, I'd...

    Too easy,

    I've got most of it sorted out, I'd had completely forgotten about the glow plug rail. I've made an plug to the IP solenoid which I can attach 12v to using alligator clip or jumper. ...
  2. Replies
    14,651
    Views
    5,028,683

    Sticky: Yeah, I am old school. I like to keep the humans...

    Yeah, I am old school. I like to keep the humans in a job. I know it's stoopid, but I'll wait at a check out so a person can handle the sale. Why should I do that. I don't work there.
  3. Replies
    0
    Views
    47

    high flow intake .... just because

    I had this sitting in a box for a couple of years forgotten about, put it in over the weekend along with the new alternator.

    I like the idea of a smoother inlet path, and it tidy's up the engine...
  4. When I had the body off my GQ chop, I just ran a...

    When I had the body off my GQ chop, I just ran a jumper from battery to glow plug rail, and a jumper to IP solenoid and a jumper to the lift pump, then used one of the push button external starter...
  5. Replies
    0
    Views
    76

    Interesting tyre compressor info

    Hi all, I have a high flow Iron Man compressor that I bought back in 2018. A year ago I bought a set of Indeflate lines to inflate all 4 tyres at the same time. Well .. slow as a wet weekend. Took...
  6. Thread: Td365

    by PeeBee
    Replies
    2
    Views
    118

    Maybe an intro would result in a better response?...

    Maybe an intro would result in a better response? What vehicle? What wheels and suspension, tires, maintenance history? Do you like long slow walks on the beach in the moonlight?
  7. Replies
    761
    Views
    287,511

    Looks like the last trip has hurt the patrol a...

    Looks like the last trip has hurt the patrol a little.

    The last few days on the trip it wouldn't move when in drive and cold, but once the trans was up to temp it was fine. It also worked in 1st...
  8. Replies
    4
    Views
    530

    I'm cautiously optimistic that the new rad cap...

    I'm cautiously optimistic that the new rad cap has solved my issue. Did a 120K drive this morning and everything looks to be back to normal. BTW. The temp gauge on the dash is useless. If I didn't...
  9. So we decided on hahndorf, it was a good choice,...

    So we decided on hahndorf, it was a good choice, very busy down the main street. Just to break up the drive and because we haven't been there before we stopped in Mount Gambier for the night before...
  10. Thread: Cuppa’s Blog

    by Cuppa
    Replies
    284
    Views
    120,449

    Ta. No, just an amateur birdwatcher. I enjoy...

    Ta. No, just an amateur birdwatcher. I enjoy (mostly) the challenge of photographing them. Has all the elements of hunting except for the killing.
  11. Thread: Cuppa’s Blog

    by Cuppa
    Replies
    284
    Views
    120,449

    Latest Blog just posted. King River Road,...

    Latest Blog just posted.

    King River Road, Diggers Rest Station, Karunjie Track, Duncan Road, Langi Crossing & now we are on the Gibb River Road heading eastward to Mr Elizabeth Station where we'll...
  12. That's gold. I agree on the exhaust, but he...

    That's gold.

    I agree on the exhaust, but he likes it.

    The jeep developed a starter motor issue leaving coffin bay. They have family in Adelaide so wanted to get there with only fuel stops. We...
  13. Yeah my TD is at 700rpm. As for the dash issue...

    Yeah my TD is at 700rpm. As for the dash issue even though its fixed, look closely at the pcb on the back. I have read that sometimes the solder lets go and creates issues like you have had. The...
  14. Got into Kalgoorlie pretty late so only had the...

    Got into Kalgoorlie pretty late so only had the next day to look around. So much to see.

    Big day driving from Kalgoorlie to mundrabilla roadhouse 830 KMS which was home for the night.

    Next day...
  15. Replies
    5
    Views
    1,240

    The high idle can happen when someone plays with...

    The high idle can happen when someone plays with the fuel screw. You can't back off the throttle lever enough to compensate for the higher idle.
Results 1 to 15 of 200
Page 1 of 14 1 2 3 4