Search:

This is how I did my cover. Trimmed it down with a Dremmel and then sliced a piece of vacuum hose longways and put it around the cut section....

You can use a power finger file to remove some material from the plastic cover. Don't forget to cable tie all hoses and trim ends with a knife not side cutters etc, You'll thank me later
ALL cable...

hi brian
where the top hose touches the side of the cover
just trim to suit its only soft plastic

cheers roofy

i went AuberIns EGT and BOOST (http://auberins.com/) from advice from these forums.
Digital readout and can set min/max + alarms.

From the US but arrived within 3 weeks.

These are non-pillar...

You won't need a new EGR valve if you are going to block it.
Cheers, the ferret.

Mate it was in the snorkel itself, trapped on a bend through the guard. Popping the air box let it breath and indicated a blocked snorkel...

I hope you have found your problem.

A mate had similar issues in the weekend, we propped the air box open and it ran well. The snorkel was blocked! 2 handfull of leaves and sticks.

No more...

It'll probably go BANG! ;)

Likely a dramatic loss of power, smoke all things bad. Lack of Boost will be the real indicator though. How long have you had the car? how well do you know it? have you...