Search:

On the above photo you can see the fuel filter sitting on top of the tank, think it just has a bit of rubber around it to stop it vibrating.
Below photo pump sitting next to tank, pretty sure i used...

Hey there, sorry about the delay!
Here's a couple of pics of the pump my mate gave to me on the M5 many years ago, Standard VL commodore fuel pump with its regulator!
39265
39266

Hey there,
have done mine the same a while ago now, but the internal fuel pump is no good for a primer, had to take out mine completey and not use it, Tried using it and stopped flowing when the...

When installing the new engine make sure you do the timing belt and set the cam timing as a skyline rb30 not as a vl rb. The skyline runs 1 tooth advance over the vl and produces more low down torque...

HI mate,

I am having the exact same issue with my 3.0 Gq patrol at the moment. I have replaced, spark plugs and leads, cleaned carby, changed air filter, fuel filter and still having the same...

Sometimes you can't and sometimes you don't want to!

Bubba, id look at lengthening your diff and transmission breathers.
Maybe get some of that battery terminal spray onto any exposed...

Just for info, here's the LRA instructions for fitting the belly tank (fitted to my GQ TD 42). The transfer pump arrangement works fine and is pretty simple to set up and trouble-shoot.

At my local Bolt Bloke if you like I can get you a price if its not available your way.
Know them very well. whats postage $20 to NSW on top, I'll
ring monday for you

On the weekend just gone I attended a fun run which turned out to be one huge mudfest!! :)
And from the weekend I have a small issue which can easily be fixed with a bit if cash but I want to nut...

I'd be seriously careful about getting a second hand engine out of Saudi (as I Iive here). You never know the history and it might have done 50000kms through 3 summers (@ 50+ C) without an oil...

might have to send me a reminder, but i just put a reminder in my phone for 31st aug day after i get back

If your after good sockets that are well priced. You cant go past bahco sockets i have a set they are amazing come in a great case to chuck in the truck. They have a life time warranty Snap On owns...

Have a look at this link it has the glove box manual

http://www.abouttimespares.com.au/showpartslist.asp?cat=4&sub=2228&subsub=6889

That is idle adjustment pull it outward to up the idle then clockwise to lock it in position.
Anticlockwise to unlock it and let it go back in.
Handy when warming up the engine or when tackling...

Just the standard wheel brace should do it mate - they're the same size and the wheel lugs. Assuming you're meaning auto hubs of course?