28th November 2013, 10:52 PM
That looks correct. I'm just not sure if you need to connect H3/2, H3/7 and H3/8 because Patrol don't have the second ignition circuit.
Tacho signal is from the negative side of the coil.
28th November 2013, 06:51 PM
Good luck.....hahaha
A flex relay just means the relay can be switch on positively or negatively...... ie with patrols we switch positive to the spot light relay, 85 terminal is normally earthed...
3rd December 2012, 06:11 PM
I just ordered a awning on eBay 2.5x3m $240 & can get fly screen walls or tent walls with screens/doorway if wanted later on. I have a dome swag so I can set it up under cover without worry of rain....
9th November 2012, 05:30 PM
I have already designed one, it contains a virus..........well its more of a link than a button, but with 1 click it will take your money..........I will send you a link to the nissanpatrol.com.au...
21st August 2012, 08:28 PM
No there not even close. There high beam is equal to a 70 HID Lightforce XGT with spread and nearly the same distance.:smile:
There not really designed to go in a spotlight though. You would be...
21st August 2012, 07:27 PM
You can put a 55 watt bulb in it but you need a 55 watt ballast as well.
The cut off is done with a laser cut piece of stainless which is part of the projector.
Cheers Mick.
20th August 2012, 05:59 AM
There's no comparison one is just a bulb fitted to a reflector which throws light everywhere and but where you need it on the road. These kits replace the bulb with a HID projector which the bulb...
21st April 2011, 01:20 AM
HTB grease for wheel bearings, moly grease for CVs, but check this, and not really sure what was meant to go into king pin bearings - read three manuals and still a bit uncertain. Used moly grease -...
27th December 2010, 10:13 PM
The front diff I was working on for this article was out of a GQ Patrol and was fitted with Nissan manual hubs. The job is the same on GU Patrol with only minor differences in the hub nut area.
...
