Yes they are different. A temp sensor requires coolant around the probe to give you an accurate reading, if there is no water in there you can cook them without the gauge reading anything close to...
Yes they are different. A temp sensor requires coolant around the probe to give you an accurate reading, if there is no water in there you can cook them without the gauge reading anything close to...
I'd Spray the MAF sensor to eliminate that from the equation,
You blowing extra black smoke that you can see.
Do one fix at a time so you'll know what the problem was
Graeme,
The coolant is pumped around the motor, in a never ending loop, and is designed to flow straight through the radiator to dissipate the heat, and back into the loop. In a perfect system,...
Oops didnt mean to paste so much.
Had the same thing on a cummins engine on a drill rig. 2hrs later it had completely come away from the shaft. So i wouldnt recommend ignoring it.
Good work on...
No need to back the Dawes off, just back off the needle valve. Backing the dawes off will alter the maximum boost level. Opening the Needle valve will correct the cruise boost level.
Hi june what you have there is pretty good each moter has its own charcteristrics so woudnt worry to much
if you want to fiddle with it just turn the dawes down a hair width to get what you want
That's sounds fine ,my is 10psi @ 100kph, My max is 15psi and temps re the same.
I'm happy as with the way mine performs atm.
Very crisp and perky might be the term
no not at all mate it will just mould around the keyway.
The rubber is mostly there just to keep the things quiet. so it is not metal on metal. they are about 3mm thick and have 3ton of car...
yeah they seat in the top though
Some say yes. I say no. I have never disconnected the battery after doing any of this work. Doesn't really matter if you do anyway. Only takes a minute.
What he was doing to just trying to clean the intake. As pre blocking the EGR the intake does gum up. Most people when htey block the EGR they spend a day removing the whole intake side off and...
You shouldn't have to put a bigger fuse in the indicators.
What size fuse are you using?
June,
It is a tough one to consider what is the best thing to do, as I have had to do the same thing with mine....
You have a fair bit of weight on board, with the long range tank and water...
Will need strengthening if into heavy duty towing , A sensible mod IMO
Superior Engineering do 2 different bolt on kits mate. For the GU their bolt on Brace kit would be the best option.
http://www.superiorengineering.com.au - Spring Tower Brace kit