ADRAD is highly recommended. I have a build thread on my 04 GU in the members ride section. I have a heavy duty alloy radiator fitted to mine, it has 35% more capacity than the standard unit and...
ADRAD is highly recommended. I have a build thread on my 04 GU in the members ride section. I have a heavy duty alloy radiator fitted to mine, it has 35% more capacity than the standard unit and...
The bigger the better keep away from alloy.also getting your td42 tuned and pump tweaked will keep temps down plus give you heaps more power
i have just started investigating this now and have come up with the spal 9" pulling fan its on ebay but believe ashdown inghams have them as well and from what i have read they pull more air then...
Hi mate, Im in the process of doing the same thing.
There is a fair few good articles on here relationg to installing the fan. I was lucky enough to be given a davies craig fan just perfect for...
Found this on "Equal" Performance Powder
http://www.imiproducts.com/equal.html
Fair dinkum, I thought a out it but never tried them.
You want to avoid a lot of weights on your rim if possible. If the guy doing the balance knows his stuff
he'll deflate and rotate the tyre 180 and try again. Plus make sure the machine is set up for...
May be worth mentioning.
Balancing the rim and tyre seperatly first, and having the balance completed in this fashion has for me had better results.
Far Less weights needed to balance tyre and rim...
Hey mate I have run both and am currently running KM2's on my GU in a 285/75/16. They balance up fine and are an awesome all round tyre havent put them through as much punishment as my MTZ's but on...
tyres are the usual culprit especialy chunky tread ones that are running edges (one edge of a side chunk is higher than the other side of thesame chunk)caused by wheel alignment issues. wheel balance...
sure they're balanced right? ,as at a 4x4 shop, might take a bit of vibration out, some shops and tyre places are lazy and wont deflate the tyre on rim and rotate it 180 deg to see if they can get it...
Yes I've noticed around 80km/h, very slight but still there. (GUIV steel rims)
Yes this is common. search steering vibration/shaking. Most report this at about 80km/h. Seems to be a Nissan factory fitted drama. I have found it is worse with my GUIV Alloy rims than my steel...
I did my 2" body lift a few weeks back and have now got my coils and shocks :santa:
Look at my glory boot :devilred:
http://i667.photobucket.com/albums/vv36/daudwpsyn/2012-06-22122332.jpg
It...