Search:

So I had a bit of a dumb moment last night/today which could have ended up being costly, but managed to figure it out in time and learnt something new :icon_bonk: :D

So here goes:
I recently...

Installed a new box of tunes

http://i1083.photobucket.com/albums/j396/Rocket5555/Build%20Pics%20Patrol/079D77B2-0572-4261-B63C-D08A4C779ED7_zpszegxz065.jpg

Good luck mate.
When I sought advice most mechanics who knew about this issue told me to leave it be. It's a fairly large job to fix.
It's a gear box out job in order to get the sump off, in...

What motor ,year etc need all info for others to see

Next up you'll want to do the small rear door strut,
great mod keeps door open when patrol is on an angle

Blow up the photo, it's Oposite Lock. Looks good.

Very nice. Who's bar is it?

Good work, basically that's all the HPD Maf housing is, BUT has slightly larger where the MAF sits, if I was to do it again I would do exactly as your doing and just hone the original MAF housing...

had a bit of a think and want it to look the part so
Im going to tig weld a fitting into one of the Stainless elbows
I have some AN 10 braided hose to pretty it up with the right terminals

Not today but I got these on Saturday at the Perth Comicon to add to my collection.



57119



57120

6 new boots - Hankook Dynapro MT RT03's 285/75/16.

http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=57063&stc=1

Played around with the needle valve ,,,,again
running better than ever, temps at 100kph were as low as 250C on the flat,
Very happy with that

Entry 1
BBQ dinner at Spear Creek, Lower Flinders.

56983

Spent a few hours this afternoon making myself a drawer for under the fridge.

brekkie on the Meerup river with a few of us WA NP fellas and ladies