Search:

You have blown the fuse under the bonnet ,one of the black plastic covers in front of driver,
,were you towing a trailer at the time ?? replace the fuse with a 15amp job and you'll be right
@ Bob...

Due to a few people asking about removing door trims in the past, I decided the next time I remove "my" door trim, id get some pics up with instructions.

My GU (and so this guide) is a series 1 GU...

Because they want to do the oil change for you and charge you accordingly.

This was gonna be my entry, guess the time difference screwed me up..............LOL

http://i276.photobucket.com/albums/kk22/Fracster/Wildlife/Going4.jpg


Better get my ass in gear earlier...

Pic 2
Fence around Beverley Uranium Mine near Arkaroola in SA, Taken in 2007.
Its a tall cyclone fence with triple strand barbed wire but if you look in the distance it changes to an old farmers...

My 3rd entry.

'Birdfence'
Zebra finches are a reliable indicator of water nearby. In this case a dripping tap close to the cyclone fence at a Barkly Highway rest area.
...

Flinders Ranges in 2007 taken after we did Skytrek.

Yours truly, contract fencing on a property in the Gulf in 1980.

Apologies for the quality, it's a scan of the original photo.
...

3nd photo submitted as requested

Sorry should have read the rules, thanks for the tip.

Second entry. Old Police Station and Gaol of an old town, between Dongara and Geraldton.

the dingo fence west of opalton QLD

http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=35152

My first entry.

Old fence line across salt lake. (Lake Ballard, WA).
You would have to wonder how often the wire had to be replaced whilst the posts were still in good order with all that salt.
...

Yes, large terminals are for you battery connections and the smaller ones are ignition and earth.

The easiest place to pick up an ignition feed on a GU is at the wiper motor.

I wired mine up with the smaller terminals one to ignition on easiest is the diesel pump positive feed or coil positive if a petrol.
Then i run the other one inside the cab to a switch to earth as a...

Undo the two screws above the heater controls, leaver the bottom corner (left or right) of the facia panel and pull on the bottom edge towards yourself. The panel clips will "pop" out and you will...