OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

Search:

Page 1 of 3 1 2 3

Search: Search took 1.00 seconds.

  1. Replies
    6
    Views
    3,782

    x3 on thrust bearing, just did my clutch and...

    x3 on thrust bearing, just did my clutch and gearbox recently.

    I had the same problem when my truck was idling, soon as replaced I replaced the clutch problem fixed.

    Good luck with it

    Mark
  2. Replies
    6
    Views
    3,782

    X2 sounds like thrust bearing

    X2 sounds like thrust bearing
  3. Replies
    6
    Views
    3,782

    thrust bearing, replace it and get a new clutch...

    thrust bearing, replace it and get a new clutch while you have it open
  4. Replies
    4
    Views
    2,125

    I remember changing an engine in a laser years...

    I remember changing an engine in a laser years ago and the old engine had left the exhaust full of oil so i took it down to the industrial area at night one lap was about 3 klm.s and i could barely...
  5. Replies
    4
    Views
    2,125

    Maybe a decent run at hwy speed might burn some...

    Maybe a decent run at hwy speed might burn some soot off but as Nissannewby said problem could be elsewhere. originally I thought you were having a choof then decided the exhaust needs cleaning, hey...
  6. Replies
    4
    Views
    2,125

    What sort of smoke mate? Not a great deal you can...

    What sort of smoke mate? Not a great deal you can do to clean an exhaust out other than replace it. If your getting smoke your problem will lie elsewhere.
  7. Replies
    2
    Views
    10,040

    i just had the Tappets done on my GUIV TD42Ti and...

    i just had the Tappets done on my GUIV TD42Ti and although they only needed slight adjustment it made a big difference to the noise on start up and overall the engine seems happier. I had it Dyno...
  8. Replies
    2
    Views
    10,040

    Hi mate, have a read of this below....The first...

    Hi mate, have a read of this below....The first post is for the TB42 but keep reading the rest and it will help you out.
    ...
  9. Replies
    1
    Views
    1,442

    You should be able to see if the bushes are...

    You should be able to see if the bushes are cracked or split just by looking over them, and you can test your shocks by disconnecting the bottom and seeing how fast they drop (thats the only way i...
  10. Replies
    4
    Views
    1,792

    Unlock when on the road in 2wd and lock when you...

    Unlock when on the road in 2wd and lock when you engage 4wd for dirt, rock, mud etc.


    Tapp tillya Crap
  11. Replies
    5
    Views
    2,838

    Definitely based on your description of use i'd...

    Definitely based on your description of use i'd be going a Micky Thompson ATZ 5 Rib for the perfect tyre for your car.Great on the road, they are a Light Truck Rated tyre i think and will still get...
  12. Replies
    5
    Views
    2,838

    If just doing bitumen driving AT will be good and...

    If just doing bitumen driving AT will be good and still go ok off road but at the same time you can get some MT that aren't super aggressive and good for on road as well.
    Really just comes down to...
  13. Replies
    5
    Views
    2,838

    I've got cooper stt's. They are ment to be a mud...

    I've got cooper stt's. They are ment to be a mud tyre but are a little less aggressive than similar mud tyres e.g. Mickey Thompson mtz's or bfg mud tyres. But I find they wear better. I do 400ks on...
  14. Replies
    5
    Views
    2,838

    Whatever you choose rotating them every 5-10k is...

    Whatever you choose rotating them every 5-10k is crucial for longivety (do mine every 5k including the spare)


    Tapp tillya Crap
  15. Replies
    5
    Views
    2,838

    Running MTZ (mud) on my patrol and wife's prado...

    Running MTZ (mud) on my patrol and wife's prado great all round tyre. Both cars do get used for offload also
    If most of your driving is on road with occasional mud/rock/sand an a/t such as the...
Results 1 to 15 of 31
Page 1 of 3 1 2 3