2012 came out with only a 3l diesel in Australia
2012 came out with only a 3l diesel in Australia
Thought I'd add to this thread. Spent most of today putting back the new intercooler plumbing and fitting a provent catch can. Drove around for an hour, opened up the catch can and there is already a...
The 4 speed auto's have a lock up torque converter so what feels like 5 the gear is the torque converter locking up to give better fuel economy on the highway.
I'm on my iPad so can't see the poll but I'm pretty sure the poll is public. Click on one of the numbers and see if the names pop up?
Scotty,
I'm taking the car back to ARB in the morning to fit the castor correction bushes. Since the lift and the new tyres, the steering has been lighter than I would have preferred and I am a...
I'm pretty sure it was the 2nd so everyone can meet up, recoup and leave the following day.
Not sure on exact duration (Darren?) across but there's no rush in my books.
Hi, Ive been a member for a few years, and have found a lot of helpful information in that time.
As I havent found many first hand accounts of CRD grenading I thought I would post this.
My 2007...
Darren mate i knew that yes look at the numbers
then and now
come on guys this is a once off for some of us
lets do it this is what this forum is about
Sorry to disappoint fellas but alas, I have also received my free Denco hat today and mighty fine it looks too :D
No, wounding it out aka opening it will reduce spool rate which slows down the turbo response which lowers down the boost. Wounding it in aka closing it makes it spool up faster with higher boost at...
Well, you'll know alright, the boost spool up will be slower and car sluggish/slower to accelerate. No real damage from slower spool up. You need to do it in small increments. Did you observe spool...
I'd blocked all ports on the solenoid so as not to get it filthy, you never know when you want to re use it again. The damper is the same on Di as well, when you change over to needle valve it is on...
I brought mine on ebay, but only use for vacuum not boost or fuel.
it's pretty thick walled as well, should only cost max 50cents a mtr
http://www.ebay.com.au/itm/APE-BLUE-VACUUM-HOSE-6MM-X-3-METERS-/180834028489
http://www.supercheapauto.com.au/online-store/products/SAAS-Vacuum-Hose-Blue-6mm-x-3m.aspx?pid=286635#Cross
One of the hydraulic mobs or even Clark rubber just check pricing as it can vary a lot