The injector lines have to come off, once you have them off, the manifold is not to hard to remove, be Shure not to get any crap in the lines or pump.
It will also be a good time to remove all the...
The injector lines have to come off, once you have them off, the manifold is not to hard to remove, be Shure not to get any crap in the lines or pump.
It will also be a good time to remove all the...
Not being picky, just clarifying.....EGT gauge, EGR blocking plate. Good luck mate.
Rob
what he said...hahah
Its funny that, not all people seem to overboost with a 3" but some do.
Get the dowes valve and even a needle valve and you'll be right mate
OH mate we all knew that, very common problem on this forum. will help out as long as you want tonight
ZD30 Prior series 4
there should be 4 wires at your MAF they'll be Red, White, Black and White terminal 1,2,3 and 4 respectively,
With the car idling, warmed up to normal operating temp, vehicle...
This pic shows the position of the Mass Air Flow sensor (on my ZD30) on the top of the air filter housing. Shown here with the wiring cover removed....