Search:

DO NOT USE Z9!!! although it may screw on.. ITS A 3/4 SAE THREAD AND THE NISSAN Z115 AND Z170 ARE 19MM,z170 is a short version of the z115 the z170 is use for clearance issues when height is a...

id look at something simpler, mq or mk non turbo diesel swb....strong cheap and almost bombproof and still simple to fix and maintain.... just a thought?

check the pcv , if its building crankcase presure that will be the first gasket to go.. alsol when you fit a new one dress the gasket with loctite 515 or 518 ,these are anerobic sealants and are prob...

should fit as tb42 is same bell patern man or auto other wise engines would have to be different .... the clutch however is another issue, but my experaince with nissan is although things make look...

if the clutch has a soft line, ie rubber hose , check to see that its not bulging under presure too...

hey guys this will follow the whole build of my shorty mq sd 33 from now( this is how i found her)...http://i1096.photobucket.com/albums/g331/skylineasassin/IMG_2300.jpg...

light force are they go... unless you can find a cheap set of ciebe super oscars!